SVR Global is the top Pneumatic actuated butterfly valve manufacturer  in USA. Our best quality valves are supplied to oil and gas industries, chemical industries and mining industries. Pneumatic Actuated Butterfly Valves are widely recognized for their ability to regulate fluid flow, whether it be stopping it altogether or initiating it.

A pneumatic butterfly valve works by using pressurized air or gas to control the position of a disc (or butterfly) within the valve body. The disc rotates against the direction of flow because it is fixed to a shaft that passes through the valve's center. By turning the disc 90 degrees from its fully closed to fully open state, or vice versa, the pneumatic actuator opens or closes the valve in response to a signal, usually pneumatic pressure. This rotational motion regulates the fluid flow via the valve.

These valves are particularly effective in low-pressure situations, and can handle substantial volumes of liquid, gas, and even fluids that are laden with suspended particles. What makes them so useful is their capacity to convert the power of compressed gas into mechanical motion. Their operational dependability and efficiency are well-known, and they are also incredibly cost-effective in terms of maintenance.

Parts:

· Pneumatic actuator

· Butterfly valve

· Valve body

· Stem

· Disc

· Seats

· Flanges

· Positioner

· Solenoid valve

· Limit switches

INDUSTRIES

· Chemical industry

· Oil & gas industry

· Petrochemical industry

· Technical gases industry

· Energy industry

· LNG & LPG industry

· Textile industry

· Petroleum industry

SVR Global, the Pneumatic actuated butterfly valve manufacturer in USA manufacture valves with the following applications:

· Chemical processing and manufacturing plants.

· Water treatment plants and wastewater treatment facilities.

· Oil and gas pipelines and processing plants.

· Power generation plants.

· Mining and mineral processing.

· Pulp and paper processing.

· Marine and offshore applications.

· Fire protection systems.

· Compressed air systems.

Advantages:

· Precise and reliable flow control.

· Fast actuation and response times.

· Simple and compact design.

· Cost-effective solution for moderate pressures and temperatures.

· Easy to install and maintain.

· Low maintenance requirements.

· Can be used for both on/off and modulating applications.

· Can be operated remotely.

· Provides high flow rates with low pressure drop.

· Can handle high viscosity fluids.

Description:

•Body material: Cast iron, Ductile iron, Stainless steel (SS316, SS304, CF8), Carbon steel, carbon steel, WCB, WCC, WC6, LCB, LCC, LF2, WC9, Duplex steel (F51, F53, 5A, 6A).
•Class: 150-300. PN10 – PN40.
•Size: 2”-72”.
•Connection type: Flanged, Lug type, Wafer type.
•Disc: CF8M, SS316L, CF8, Cast iron, Carbon steel, Ductile iron.
•Operation: pneumatic actuated.

Configuration of a Pneumatic Actuator:

· Torque – 3 – 9000 nm

· Operating pressure- 8 Bar

· Port Connection-NPT1.4”

· Mounting Base-ISO5211

· Temperature–20°C – +80°C

Visit our site for more information-

https://www.svrglobal.net/product-category/pneumatic-actuated-butterfly-valve/